34mm Microphone Capsule Mount

by ViewUpHere Apr 9, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

I built a microphone using the MXL 910 as a donor and the MP-V57 kit from microphone-parts.com. I've been thinking of using a BM-800 and doing it again because I have two more capsules. Thanks for sharing.

Hey, cool! I haven't built one of the kits from microphone-parts.com, but I've wanted to build one of their tube mics for a while.

Actually, I've been curious about the MXL mics. Do you know what the hole pattern is for mounting the saddle in there? Just curious if this thing will fit the MXL mics as well.

Good luck on your BM-800 build!



Sorry for the late reply. I need to take mine apart to see. I have an MCA SP1 which I'll be putting the new kit into. I'm waiting on my kit to get here so I can get started. The hole patterns are way different. Email me billkarolyATgmailDOTcom and I'll send you pictures and hole pattern with dimensions.

Isn't the BM-700 and BM-800's head basket a little short as in a tight fit? I ended up buying a TH900 from Amazon and I think it's barely dooable. I took your stl file and shortened it a little. I also added a round indent to the base below the screw holes.

The TH900 has a mounting hole pattern 1.5 x 1 cm and only two of the four holes are tapped.