Something different for a party. A DrinkIMBLE game!
Have a fun filled evening with a partygame familiar from past!
But..I'm not going to lie, this takes a lot of printing time and work but totally is worth it! :)
2 different versions to print. 100mm x 100mm (zip) or 220mm version.
If the file name says 1of (something) then larger number is needed to print the said file to complete the board. 100mm version requires ~37 parts to be printed and glued. (avrg printing time for a part with low settings was 40min)
-> 220mm version is equipped with slots for 5mm magnets.
-> 100mm version doesn't have slots and can be either glued together as is or to a board or partly glued with 8 pairs of magnets like I did.
16pcs shot glasses
https://www.ikea.com/us/en/catalog/products/90091996/ "Pokal" snaps glasses.
16-32pcs 5mm cube magnets
This can be cut out of from real kimble (trouble) game or to be bought separately.
Print version suitable for your printer. For corners use different colors if wanted or available.
OR use full board stl for CNC router (recommended)
Glue magnets to parts if needed.
Separate the pop-o-matic from the kimble/trouble game and glue to the center.
Have some different color liquids for player game pieces and have a fun filled evening!
BE AWARE! DEPENDING LIQUIDS USED, THIS GAME MAY HAVE A DAY (or more) LASTING EFFECTS!
EMPTY THE GAME PIECES RESPONSIBLY!
(Edit: Picted in the thumbnail image is food colored water and energy drinks)