Downloads also (including older and next/development versions):
We publish last bundles only on Thingiverse.com, if you have any issues with any part, check if a new version has been released on our website in the "New versions" category. These new versions will be parts of next bundles. Subscribe to news on our website to get information about new files. https://www.shark.aero/downloads
Wingspan: 990 mm
Length: 856 mm
Wing area: 12.9 dm2
Airfoil: Clark Y modified
Take-off weight: 940 g
Printed weight: 540 g
Center of Gravity: beside the main landing gear leg
Flight time: 10 min.
The airplane is a suitable model for experienced RC pilots as a transition model from EPP models to 3D printed. Thanks to the chosen airfoil, it flies slower and more gently compared to equally large 3D printed models currently available. With the recommended configuration we tested 10 minutes flight and it flies more briskly in the version without the landing gear.
G-codes were generated using Cura 3.1.0 slicer and tested for Original Prusa MK2S printer, but we also achieved comparable results with a cheap Chinese printers Infitary M508 and Anet A8. Recommended material is PLA, landing gear parts could be ABS, HIPS, PETG or other materials.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.