Vacuum upgrade to V10, only to find that all old acessories are basically obsolete.
Quick take on an adapter and tested it working. Maybe some refinement will follow. It basically works, but I'd be thankful for any input.
Save your investment, own your device.
Added Fusion file for further messing by public request :)
Speaking of mess: do not look too closely onto that file. My projects invariably tend to deviate from Fusion's best practice recommendations at some point in the version history...
At least you can pull the dimensions from it, if all else fails.
40% rectilinear (Simplyfy 3D)
Both parts are orientated in th eoptimal printing direction and easily print without supports. The adapter body could use some supports on the release button and the cutout for the arresting pin, but mine printed ok without any. Gorgeous results with my new favourite, ColorFabbs nGen (Copolyester)
Short update on material: careful with CPEs. Mine got brittle over time and it snapped the release button (involved a lot of cursing and several pliers to separate the adapter from the vac. New iteration is PETG which should keep more flexible.
Lift the arresting pin to push the outer ring over the main adapter body and let it click into the cutout.
Lift the pin to release V6 acessories, push the button to release the adapter from the vacuum.