ELGATO Stream Deck Vertical Stand

by Black-Demon Apr 20, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Can confirm that the scaling is correct now, printed mine with no issues and just finished putting it together. Will add as a make shortly.

Love this design. I printed the head at 100% scale and found that the inside width was 116mm and when I measured my stream deck the same dimension was 118mm. Seems the files are still off slightly. I have used Ideamaker to scale the width up by 2mm and am attempting another print. I will report back with my results. Hope this helps someone else.

Edit: I got the scaling to work perfectly by opening the file in Fusion 360, then clicking "Make" and selecting Cura as the printer software. Fits perfectly! Drilled a hole big enough to fit the end of the USB cable through and looks great

What is the scaling percentage?

Drill a hole for the usb cable?

So has anyone figured out the scale issue on this yet plan on playing with it tomorrow was just curious if anyone solved it to save myself some time

Has anyone fixed the scale problem yet? I have the same issue and wonder if it is 10X

Is it just me, or does it load at the wrong scale in Cura?... by a factor of say 10? If you scale XYZ by 1000% instead of 100% it appears to be the right size?

Not printed yet, but looking for some feedback. Should this be approximately 150mm long?

Very slick.. I like it

Thanks, this is very nice designed!