This is an Arduino Game System compatible with Arduboy (http://www.arduboy.com).
You can find how to make all wiring of the DIY Arduboy on this forum thread:
Case assembly is pretty straightforward, all parts are held together by screws and some amount of hot glue.
- OLED screen 0.96''
- Arduino Pro Micro
- DC-DC step-up converter (optional)
- WS2812 led strip (optional)
- Two piezo buzzers
- Power switch
- 3 AA battery holder
- 50*70 solder board
- 6x 12*12 tact buttons with caps
- M3 and M2 screws
- Wires and other stuff
Printed from PLA filament with 0.6mm nozzle and 0.2mm layer height.