Build Plate mounted camera and LED holder for MPSM V1&2. I included the GoPro Session mount I made for this, but any camera/mount can be used instead. Designed so everything can be printed on the MPSM V1&2. I supplied .stl files for everything you'll need to build and mount completed assembly EXCEPT
- Quanty-2: M3 Bolts/Nuts. (If you don't have M3 supplies you can use 2 small Zip-ties instead)
OPTIONAL- I've noticed after a while the mount sometimes vibrates (especially if Y-axis belt is loose)
This can be solved by placing a piece of foam between mount and build plate, or do like i did and wedge a piece of scrap PLA in there as a shim ;)
Let me know your thoughts and ideas for any improvments!
Everything can be printed in .2 layer height and 10% infill EXCEPT THE FOLLOWING:
Thumbscrew, Nut, Bolt, & Wingnut.....Print these at .1 layer and 50-75% infill
Mount needs to be placed diagonally on MPSM V1&2 build plate to fit!
2 additional holes in mount for adding LEDs. Great for doing time lapse videos into the wee hours of the morning