Petsfang for Alfawise U10
I was asked by Tim at TH3D to design a duct system to cool his new .8mm nozzle on his Alfawise U10 for managing good cooling on his large vases. This mod incorporates 2 separate, enlarged plenums with a balance port in between. The balanced port adjusts the positive pressure within each duct to produce a balanced airflow from each out-port. It really has a ton of velocity at 100% so I would suggest you run some test prints with your filament to check what your needs for any printed parts will be. It is designed for .3mm or greater layer thickness and .6-1mm nozzles. Dualfan is to be used with a Volcano Hotend for best performance
New files with right mounting hole refined location. Backplate clip tightened up.
Routing for wires from right side.
Files starting with u10 are for the stock hot end.
All U10 Files are up. Thanks to Raymond Borrego for help on the prototype measurements to U10 back plate. It's more than just mirroring the mount!
If you are looking for the regular Petsfang please follow the link below
I am working on bases and ducts for the Alfawise U10 large format 3d printer.
Stat tuned as we test these on this new platform.