Saw some ideas floating around for shock prep stands. Figured I could knock two birds with one stone and utilize it as a tool holder and a shock prep stand.
I wanted to make it fully collapsible so it would fit in a typical pit bag.
**Update - I made a v2 for easier fitment of parts. The first one is very tight and your printer has to be very accurate for it to fit.
This will print exactly as laid out. You may need to trim the rectangular cut outs in the main plate because the first layer is usually thicker so it spreads a little. Just use an x-acto blade to trim and it will pressure fit into the legs. The other plate holds the bottom of the legs to keep them from spreading.