USB Cable Organizer
I designed this USB cable organizer so that I would be able to move it if I necessary.
I have included 4 different versions, a straight and a curved version with a snap-in insert and also a straight and a curved version without an insert
This was the first time I tried to design an snap together Thing, and it turned out fairly well.
Please let me know if you have any problems.
I designed this for a standard (1 1/2") (38 mm) thick table. If your table is a different thickness, message me with the size, and I will try to help you out.
Also if you have a different wire diameter I will modify it if possible.
I have included a longer clamp screw to accommodate for a thinner table.
EDIT January 17 2019
I added a 26 mm standard version that will fit a 1 inch table.
EDIT February 08 2019
Added a 30 mm version at the request of a member.
EDIT February 10 2019
Added a 52 mm version at the request of a member.
EDIT May 13, 2019 2019
Added a no bottom version at the request of a member.
You can use two-way adhesive tape to secure it.
EDIT July 09 2019
Added a 22 mm version at the request of a member.
Main bodies at 25% infill
Inserts at 100% infill
Make sure you clean up the inserts and the holes for the inserts.