It allows the charger to be mounted on a pegboard for easy access and adding/removing batteries. The charger slides in and the charging plug locks it in place. The front of the mount is angled for looks and to allow it to be easily removed from the mount, it can be placed either way up as there are holes for the charging plug on both sides. The holes are intended to be a tight fit on the original GoPro USB-C charging cable plug to ensure the charger can't move around but may need some filing
I used plastic trim rivets and 8 x 1/2" pan head screws to attach this to the pegboard. The part is designed with enough clearance for the head of the rivet, however printer tolerances might mean some minor filing is required. The rivets are expanded by the screws and anchor the part in place. I have a thin metal pegboard and these work fine, they should still work with slightly thicker wood or fibreboard pegboards but I don't have any to test with.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.