This is a holder, that attaches my Makita RT0700CX2 to my CNC Machine Kim PRO. It holds a 40mm Tube, that I can attach my dust collector to.
You need 6 3mm-Magnets 8mm diameter to connect the dust show to the holder.
The dust shoe is more complicated, than I wanted it to be, but the Makita blowes its cooling air down. I route this air away to have better success with dust collection.
I use 4 outer diameters and enabled support for bridges.
Printed it with DasFilament PETG on a 80° printbed at 230°C
Attach 3 magnets each to the dust shoe and the holder itself. The holes have different sizes, so the magnets also align the dust shoe to the holder.
Remove the support ;)