I really liked the idea of this thing: https://www.thingiverse.com/thing:2680818
I changed the desing a bit to better fit my demands. I also added a duct for the filament. This spool holder can hold spools with at least 60mm of inner diameter and a maximun width of 70mm. It will fit the right side of your Anycubic i3 Mega. As mentioned in the original thing-description the stock screws will not work with this print. I have aligned the holes to match those of the stock screw holes (with some extra height adjustment), but you will need screws that are 3mm longer than stock. I believe the stock screws are M3x5 and need to be M3x8.
Anycubic i3 Mega
40% or more
More from 3D Printer Accessories
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving El_Capitan1991 a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.