Speedboat for outboard windup motor
by AWS3D, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
My nephew found an old outboard windup toy while digging in the back yard and I decided that it needed a speed boat to go with it and I jumped into fusion 360 and made this cool little boat.
Demo video: https://youtu.be/fVQvHZMmFek
I printed this in pla with supports only touching the build plate. As you can see only half of the steering wheel successfully printed however I am ok with that. There will be lots of strings if printed this way but they should be fairly easy to remove and the top surface should come out clean.
Upgrade this Thing with Thingiverse Apps
Speedboat for outboard windup motor by AWS3D is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving AWS3D a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure AWS3D would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).