Loading
Z0r4n

Hera styled Frontgrip for Rapidstrike (or other blasters)

by Z0r4n May 11, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

I made one, Thank for the cool design by the way. May I ask how I use the rail on the top to nerf attachment? I have to competely gut it out ? Thank.

yes, you need to cut/remove the supports

Note to anyone else in the future, and especially for left handers: This grip is carved out on the right side, so the grip is asymmetrical. You will have to mirror the parts in your slicer to get a proper contour fit.

Additionally, be aware that you need at least 20mm, preferrably 25mm screws, and the M4 nut is actually particularly small, so consider stepping up to M5, although if M4 is all you have, it will work, provided you have the correct length.

Be aware that supports will be needed, if you are printing it flat side down (which you should, makes for a better joining surface for the two halves, and one side is flipped up that way anyway), to ensure that the rail connection slot is properly printed.

Also this grip is a little on the small side, so it may be uncomfortable for people with larger hands.

Polishes up pretty well though, looks great.

If possible, could you provide STEP files? STLs are near impossible to edit.