Tevo Little Monster Big Spool Extension
by bLITzJoN, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I needed to extend the stock spool holder to support Filamentum's 2.5kg Maxi-Spool. Two versions are available, one tapped for the stock pipe or without requiring the nuts. I've included an M30x1.5 model if you need to print a replacement nut.
Delta (Little Monster)
I used 4 shells and layers. The threads are tight cause I didn't want any play. I used 3D Solutech Teal Blue PLA.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Tevo Little Monster Big Spool Extension by bLITzJoN is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving bLITzJoN a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure bLITzJoN would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).