Custom Hull SS Minnow Non Benchy
by Ramblin73, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is not designed to be a diagnostic tool for your 3d printer. This is the Custom Hull Undamaged SS Minnow. I modeled the previous damaged version on a remix of the 3dbenchy so I thought I would try my hand at my own custom hull design. I also redesigned the wheel as the previous damaged boat was too fine of detail to print well at .2 layer height.This design shouldn't need supports depending on how well your printer handles bridging gaps.
How I Designed This
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Custom Hull SS Minnow Non Benchy by Ramblin73 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Ramblin73 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Ramblin73 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).