this Camera mount is designed for the Logitech C920, although i'm sure it will work fine with anything that needs a camera screw, just use common sense the lighter the camera the better. also the mounting base has enough room if you want to add an LED Strip.
**** This camera mount is designed to fit EXTREMELY snug to the bed carriage to reduce vibration, so it may require some tapping with something like the handle of a screw driver to get it aligned properly, also test fit the screws to make sure they will slide through the holes, may require some filing.
Designed to be printed with no supports, recommended on glass bed with hairspray. inside holes may need additional filing, test fit screws before installing on Cr-10.
Test fit the screws and springs
they should be able to slide in and out with ease, may require some filing.