Jeju Volcanic Island (UNESCO World Heritage Site)
by MINIFACTURE, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Own the whole piece of the #1 vacation destination in South Korea which happens to be a UNESCO World Heritage Site.
The whole island(73km/45mi in length) is a huge volcanic remain where the volcano stands 1,950 m tall (6,400 ft) right in the center of the island.
Supplied 3D model is 1:400,000 but it is exaggerated 4X vertically for dramatic result (1:100,000).
Note that little pimples outside of a main closed curve on each layer represents lava tubes which is a rare geological feature found in Jeju.
Wikipedia entry is here (satellite photo credit also goes here)
Backdrop credit goes to a book by LOT/EK architecture. (Real book was set up in the background!)
Print with 0.1mm layer height and 0.8mm+ wall thickness.
That way each layer represents 10 m(33 ft) in life.
Data acquisition credit goes to the author of http://www.thingiverse.com/thing:7763
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Jeju Volcanic Island (UNESCO World Heritage Site) by MINIFACTURE is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving MINIFACTURE a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure MINIFACTURE would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).