This is an improved cyclic gimbal for the Simchair MKIII. It is quite similar to v1 (https://www.thingiverse.com/thing:2795753) except for added mechanical calibration capability and completely changed electronics. It uses an ADS1115 16-Bit ADC for its axes and connects to a new Arduino Leonardo powered master controller through i2c. Of course, it can still be used with an UnoJoy based controller, but I recommend switching to a Leo powered one (will be released soon). B8 stick that was a part of the v1 package is now fully functional and has moved to a separate package (https://www.thingiverse.com/thing:2918906)
2 x 6x6x4mm square magnet
4 x 3x12mm screws and nyloc nuts to connect the frame to its enclosure
2 x 3x25mm screw for lever connector axis strengthening
2 x 3x20 m3 screws for magnet holders
4 x m8x85 bolts, spring washers, and nuts
4 x 608 bearings (standard skateboard bearings)
cyanoacrylate to glue SS495A's and their wires
to their mounting spots
1 x Simchair MKIII I2C controller (https://www.thingiverse.com/thing:2919692)
1 x ADS1115 16 bit ADC
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.