Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Antibacklash nut -adjustable-
by mikadosan, published
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is an experimental antibacklash nut to be used for 3D printers and small CNC machines.
This nut uses two metric M8 nuts, one standard DIN 934 and one thin DIN 936 nuts.
Adjustability is achieved with M5 screw that can be screwed on its place without tapping the threads. It should work ok. If not, use M5 tap to make the threads. You can of course use also for example heat inserts, nuts (you have to remix for these)
Not printed this one yet - test print is up the next... :)
0.1 - 0.2
30% - 50%
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Antibacklash nut -adjustable- by mikadosan is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving mikadosan a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure mikadosan would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).