Replacement case for the ZX Spectrum +2A/B (Amstrad black model) removing the tape drive if you only need DivIDE or +3e support etc... Case is narrower than the original due to the tape drive not being there but all other dimensions are the same. It's also missing the Sinclair badges at the moment. I've currently only printed this in draft as it takes a long time to print and it is in 4 parts as my printer is not big enough to print in one go. I've glued each part together so some sanding is needed to make it neat. You can use the existing case screws with just two extra needed to support the keyboard as it is now in the middle instead of to one side.
I designed this as I had an old +2A with a smashed up case and non-working tape drive that I wanted to use with my 3eMMC. I have added extra screw holes to support the tape drive circuitry if you want to use that as a external tape input feed plus a hole for a 3.5mm jack. All other ports are there including the on LED, joysticks, reset etc... see the photos.
Bottom parts are printed flat and top parts are printed on their sides due to the lip at the back. I recommend printing with supports to help with the ports and screw holes.
I've added the top and bottom as one piece just in case anybody who wants to print this has a bigger printer.