2018.05.26 - Added a few pictures + added V2 with slightly different nozzle shape.
2018.05.2018 - adjust tube hole location to prevent the part to hit the end stop
2018.05.2018 - original version
This nozzle tip is compatible with 3Dtox and CR-10 printers with standard hotend system.
It is designed to be installed at the left of the Hotend holder, behind the original metalic cover.
difference beetween nozzle versions
V1 : Square nozzle tip
V2 : updated Nozzle orientation, in order to suck up the air slightly from the bottom
This was specially designed so that the generated particles are either directly sucked up when the cooling fan is off.
If the cooling fan is on, the airflow will push the generated particles directly inside the air filter nozzle.
We're sure 3DModularSystems would love to see what you've printed.
Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click
Post a Make to start uploading your photo. It’s even easier
to post a Make via the Thingiverse Mobile app (available via
and Apple App Store).