Loading
DESINA-ARTURO

base shelf ender3 ender 3

by DESINA-ARTURO May 24, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Hi, I printed this drawer after adding the handle from the lower drawer (and printing out the lower drawer). I did have to remove about 1 mm in width, but it is easy to cut it out of the middle and merge the two halves so as not to change the dimensions of the rails. I was just wondering if you have designed a cover, utilizing the upper slot on the left and the outer slot on the right? If not, I will design one myself, but if you already have one that would be a great addition. Thank you for designing this and making it work with the linked lower drawer.

I printed this for my Ender3 and unfortunately it doesn't fit. I think they changed the y axis tensioner so it can't slide there. thanks for sharing anyway

It doesn't fit !!! not the ender 3 pro anyway, its at least 10 mm too wide, I wasted an entire day and about 40 mtrs of fillament on this ( failed prints because of lack of proper support for the runners that go inside the frame extrusions ) and when I finally got a perfect print ( using slic3r ) it didn't fit. If anyone is considering printing this and is using free slicer programs the only one that prints adequate support is, IMO, good old slick 3 R ( slic3r ) but you'll have to reduce the X axis dimensionby 10 mm or so, I suggest you get your ruller out.

I have printed this file but i realised this there isn't lower part in this file. Where can i find it?

This looks interesting, but doesn't it get in the way of bed levelling?

Doesn't fit new ender3 version (the one with double sided Y-axis tensioner).

Do you need to take apart the printer to install these parts? I'm hoping it's only the belt holder and lcd that needs to come off

The tolerances are pretty tight and I cant get it to slide without forcing it. Any chance you could make the tray a tad shorter on the right hand side so it clears the v track? As well as maybe remove the extrusion that slides into the v track on the right side behind the lcd so that it's still supported by the horizontal surface but doesnt need to be slid into the v track groove?

What percentage infill do you use?

Where is the lower drawer? The file is missing.

I haven't printed it yet, but I think is printed in one part