Hard Drive Adaptor
by jetty, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Parametric 3/4 Height 3.5inch to Full Height Hard Drive Adaptor.
Full height 3.5 inch drives are becoming increasingly difficult to source, and some slot in drive bays (e.g. Drobo) can allow a wobble which can put strain on the drive connector over time, when a 3/4 height drive is used. This makes the Drobo or drive prone to serious damage.
This solves that problem, with an adaptor that fits on top to make the drive full height.
If there's not enough space around the drive for cooling, you may have to create holes in this design for cooling.
Print on a Replicator. Use Sugru to attach to the hard drive in the 4 corners as shown in the pictures.
Upgrade this Thing with Thingiverse AppsTools and Utilities
Repair, slice, or enhance this Thing
Hard Drive Adaptor by jetty is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving jetty a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jetty would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).