Bracket to mount a BLTouch Bed Levelling sensor directly in front of a E3D v5 hot-end with a Charlstruder Extruder. I would recommend using a very thin Heatbreak Fan shroud as I've placed the sensor as close to the nozzle as possible.
The BLTouch probe pin sits 22mm directly infront of the nozzle (Y-offset).
Charlstruder Extruder: https://www.thingiverse.com/thing:678089
Recommended Fan duct: https://www.thingiverse.com/thing:1323958
I would recommend printing in ABS