Double-sided formula 1. Ready for 3D print. Multi-colored parts print using the M600 command in the g-code. There is no need glue to assembly. Use stainless steel wires d = 3mm, length 65mm on the wheel axes (or you can use ordinary nails).
Explore real-time rendered 3D model: https://skfb.ly/6yv8S
Visit 3Dthingking.com http://www.3dthingking.com/?page_id=141
Some parts need supports (hoods, drivers). Use supports on build plate only and set overhang treshold 45°.
All parts need 3 perimeters and 4 top and bottom solid layers.
Swap colors by M600 command in these layers (or you can use Prusa Control to set up):
stripes on hood: 8,55; 11,95; 19,75; 23,15
titles on spoilers: 1,15; 1,75
Print of all parts takes approx 12 hours.