After being inspired by Tech2C's Peon230, I designed my own quad.
This one has a 236mm diagonal and has a long style body so the props don't come into view. There are mounting holes for standard size FC's. The standoffs are best printed, so they fit in the top plate notches. I made these 30mm so my standard size camera just fits. In the back there is a 45 degree mounting hole for an SMA pigtail. The receiver antennas can be mounted on zip ties.
The arms accept 22xx size motors, based on the racerstar 2205 mounting pattern.
The angled camera plate could be done better, but i just wanted to go fly.
The frame had no damage after getting caught by some tree branches, so it passed the test (pictures from after hanging in a tree and exploding a prop). I printed mine in PLA so it probably won't survive a big crash. The previous version had its arms on top of the bottom plate, which seemed less impact resistant.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.