This is a doormat consisting of 150 (15x10) parts, which are plugged together.
I printed it with PLA and a 0.4 mm nozzle on a Creality CR-10 and an Anycubic I3 Mega.
The dimensions are 58 cm x 38,5 cm x 2 cm and the weight is 1178 g.
For a doormat like this you will need:
• 4x Part 1 (corners)
• 21x Part 2 (top and left row)
• 21x Part 3 (bottom and right row)
• 104x Part 4 (middle)
Wall thickness: 1.2 mm
Top/ Bottom thickness: 0.9 mm
Print speed: 50 mm/s
Travel speed: 120 mm/s