This is a cool DIY lamp project.
If you want to enlight it, you need a switch(as in the pictures), cables, LEDs, resistors and a 9V battery.
The LED's are put through the holes at the end of the top part and connected via the switch with the battery. I took here a Voltage converter to control the LED's, and I used colour change LED's
You need every part and to assmble it like in the picture. The Top and bottom wil side perfectly over each other(maybe you have to sand it a little bit.)
The bowls are glued with superglue to th ends of the stems and then hold also the led's in place. You migt have to use a dremel or a drill for a bigger hole in the flat side of the balls, to fit the leds onto
We're sure UniversalMaker would love to see what you've printed.
Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click
Post a Make to start uploading your photo. It’s even easier
to post a Make via the Thingiverse Mobile app (available via
and Apple App Store).