Until I get the time to get around to fixing these files. Im going to remove them to prevent the waste in time and plastic.

BTW Banggood.com now sells the Aluminum brackets for $4-$7 dollars each, which maybe the better way to go.

I'm trying to make some printable brackets for a CR10 clone build. I made the bracket thickness 4.5 mm. Uses standard T8 Lead screw Nuts. I will add more pieces and pics as I get them done.

I'm waiting on some v-slot extrusions. Do not Print these till I've tested them. I don't mind wasting my plastic, but I would hate for you to waste yours. So far, the Printed Bed Plate and X carriage parts fit well. I need to adjust the other carriages. So hold off on printing those. Added pics for the 2 that are working.

My bed plate will be a 4mm thick 300mm by 300mm aluminum plate mounted to the printed bed plate(bed2.stl). A 300mm by 300mm heatbed will be mounted to the aluminum plate. The printed bed plate is 100mm x 150mm x ~10mm so you can print on smaller Printers.