This is a NON FIRING REPLICA of an open bolt Machine Pistol chambered for .22 LR . it does not actually fire as I removed the firing pin , Extractor and blocked the barrel.
!Don't forget to check out my other Cool designs and Follow my weekly KooKoo uploads, Enjoy ;)
LOWER, UPPER, SEAR, BOLT, MAG BODY & MAG CATCH :all require Raft and Support the rest don't
the Bolt & striker tubes are 6mm OD I'm not sure about the length but you can calculate it by measuring them on the STL, the stock tube is 25mm od 250 mm L
the springs are made using 0.8 piano wire wrapped around a 5mm rod the lengths need to be 175% of the carbon tubes
! Print Orientation STL : Shows you the directing of optimal print
! Items Required: