When twin motor Mini Talon is not enough, you can switch to twin EDF! :-)
Design is using wing motor mounts published by Mark Qvale.
Printed in HIPS, mounted with FMS 64mm EDF (4S) and 40A ESC.
Maiden flight done with 2x Zippy Compact 2200mAh 4S batteries to feed those hungry EDFs.
"Tube" and "Blend" can be sliced and printed together as one part.
"Pins" (4x) are used to hold EDF inside "Tube" without gluing. Solid enough and easy to fix.
"Front" can be also fixed by M3x12 screws, but I have just glued every printed together...
"ESC vent" covers ESC in wings and helps with cooling
UPDATE: added short video: https://youtu.be/o0wkBPyF-6s