I remixed -Thing: 2868250 of NeoTech76 because the X-Axis Motor would hit the fan near the top of the printer. The arm holding the case is longer now.
I added all needed parts so you don't have to search for them by yourself:
The fan cover is from: JKSniper - Thing: 2076234
The back lid is from: hackoholic - Thing: 2334119
Prints without support. Resolution and Infill doesn't really matter. I added my settings.
Printtime: 03:18:46 (piMount.stl)
Material: DasFilament NeonOrange PLA
Additional parts & mounting
I'm using the spare screws of the Mk3 kit.
- 2x M3x10mm. To mount it to the printer frame
- 4x M3x18mm. To close the pi case (Maybe use M3x16mm)
I used this Noctua Fan.
For mounting the fan you will need to use the 4 screws shipped with the Noctua fan.
Use 2 for mounting the fan to the case from the inside. 2 for mounting the fan cover from the outside.
I mounted the fan so it blows air inside the case.