- 11/06/2018 : V1.1 ; Added a lit (cache_V1.stl) for the box to be placed between the box and the 2040, it's 1mm thick which make it more shortcut proof if your not confident in using schrinkable tube and isolated stuff while wiring the inlet power socket.
- 08/06/2018 : V1 ; initial release
This is a compact power box to mount on 2040 extrusion.
Most of power box are embedded with the power supply or just too big using big inlet. In my case my power supply is at the top of my delta and I need something compact and not ugly at the bottom to plug in AC :)
There's no trap or door, there's instead a hole (covered by the 2040) where you can perform cable managment. Since I've reduce the space to a minimum, once the inlet is installed it's kind of tricky to uninstall it. (I personally broke the piece and reprint one.)
it's designed to be fixed on a 2040 using 10mm M5 screw.
For the other parts, I'm using a compact inlet, a nylon cable gland type PG7 and a domino (<- don't now the translation in english) :
Support are not really necessary if you've got good bridges. You should print the inlet slot toward the bed.