Some Pokémon Fan Art that I made recently.
I split the model into parts to be able to print it large. I tried to split it in an effective way but I also added the whole model if you want to try to print it as is or if you want to split it yourself.
The only problem that I noticed while printing it (in parts) is that there are some sharp edges that Might be a problem for some printers.
Also some parts have some nasty overhangs that will need supports.
Feel free to download and modify as you please, but make sure to leave a link to my original model if you upload or share it.
For non-commercial use only.
For more of my art, check out my instagram:
Good Luck and happy printing!
Since different software use different XYZ orientation you might need to rotate the parts (probably X=+/-90 degrees). I tried to rotate the parts to suit most printing software but make sure to check for yourself.