A 3D printable 28mm Heroic scale miniature, for use in a wargaming, tabletop games, dioramas, and other similar game applications. This is a sample of the Roman range of miniatures offered by www.i-lovecraft.com and our Kickstarter All Roads Lead To Rome.
300 micron nozzle, layer height 100 micron
Nozzle 0.4. Place the nozzle setting on your slicer to 0.36.
Nozzle 0.3. Place the nozzle setting on your slicer to 0.25.
Nozzle 0.25. Place the nozzle setting on your slicer to 0.20.
Nozzle 0.20. Place the nozzle setting on your slicer to 0.15.
Layer Height: between 100 microns and 40 microns, depending on the quality of your printer. The lower the layer height, the better the results. 'Ender 3' printers report outstanding prints between 40 and 50 microns even with a 0.4 nozzle.
Place infill between as close to or 100%.
PLA printing at 190º Temp, 70º Heatbed.
It is critical for best resolution on your prints to reduce the print speed to below 20mm/s, preferably to 10mm/s.