Loading
Hedron_Manufacturing_Inc

Seigefiend MK.II, Siege Tank

by Hedron_Manufacturing_Inc Jun 13, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Hedron I thank you for this design and all the others you have made, they are appreciated greatly. when I start printing again I plan on making some of them I will let you know how they turn out. I hope to see even more from you in the future.

I like the design, I have you given any thought to more easier to print?
Like making the barrel stand alone so you print it standing upp.

Done. I was finishing this at 2 Am and wanted to put the base out there.
Make sure to post a make if you print this!

here some hints why this is horrible to print. perhaps you can something about this.

  • The sides of the model are not flat on the inside. you should replace the large holloed out section by a flat surface with a few holes for fitting
  • the main guin is one big overhang. perhaps you could slice it up in the middle.
  • the secondary gun consists of multiple overhangs. Slice it up the middle
  • The midsection has unnneccescary overhangs, replace it by a flat bo which can be printed on the side
  • seperate all hatches and other bits from the midsection.