Ender 3 Mini IR SensortBoard Mount 2

by Benji816 Jun 13, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

The one thing I can't tell from your model is how you mounted those screws since there is no space for the screw heads on the back of the model.

(building one)

Think you're supposed to drill using those two indentations as guides and screw them in from the board side, tapping into the plastic. I added some stray M3 nuts as spacers so the supplied bolts don't protrude from the back. Think I drilled with either 2mm or 2.5mm.

Problem I have here now is I need to replace the bolt to mount it to the gantry with something longer, as the original one seems too short to have this thing sandwished in between.

I looked at the other model and it shows holes are there so there isn't supposed to be drilling going on. I would expect the stock screws to be too short. I didn't have to change the screws on the ABL design though. It may needed to be edited to allow use of the stock screws.