Case for Virhuck/Gteng T-909 FPV watch. I mount this on my Taranis at the speaker with some velcro for quick testing or for handing out so people can have the FPV experience.
Need to mod watch by cutting off watch strap stubs so sides of case are flush and straight. A pair of side cutters is more than enough. You will not be able to extend the antenna, but for most purposes, you don't really need to. Case must be printed in TPU - do not print in PLA - the screen will not be able to slide in through the top. Supports will be needed for lips and bridge points, but should be minimal. I then just put a piece of velcro to the back and stick to my transmitter. Happy Flying.