After installing the SilentStepper modules to the EleksMaker Elekslaser A3 I noticed them becoming real hot. Even the attached heatsinks were to hot to touch.
So I designed this replacement cover for the Mana SE Board with a 40mm fan, which can be connected to the motor connector on the Mana SE.
Now it runs quiet AND cool ;-)
There are two versions available. One without screws for an easy maintenance for example of the stepper current and another one with 2 screws securing the fan in place.
Screws used: M3x16
printed in PTE-G with temperature at the upper limit (stringing will occur)