skulls in 28mm scale on sprue, good for mass production on DLP printer
Monocure rapid clear resin
Layer thickness - 0.04375 - This value is natural for your stepper motor
Exposure - 18s - after some tests, we found out that monocure resin needs to be cured a little longer, at 12s skulls were tearing of the platform and we got only arrount 50% yield
Off time - 6.5s - this is the time, your printer uses to move up and down between layers, with this setting, you will have much more precise times
Bottom exposure - 90s - also bottom exposure needs to be increased with monocure rapid, on 60s we had problems with models not staingstuck to the buildplate. with 90s base exposure they stick better
Bottom layers - 5
Rafts and support are included in file.