I was thinking about buying a Raspberry Pi for a long time. I own a lot of hardware (for example a big Dual Xeon E5-2690 Workstation) but i wanted to test something like a Pi for stuff like NAS-Servers and... You know, just building stuff.
Just print this instead of the regular top and you can put on a 50mm fan.
First print so far was good, but deleted a few milimeters on the USB-Ports to get it more better, also spared some room on the GPIO-Pins for 5V. Update will follow after next print. Plus: More airvents added.
Also: I highly recommend to print this thing "the right way", so you have to print more support but you dont mess up the screwholes like me. Also you will have a better visible surface.
The notch at the rear part of the model will be removed, i am going to update the bottom parts for this!
(At the moment i am printing the second version, should be done at 16.06.18!)
Added the bottom without screwholes and a few pictures of the first beta-print (lots of stringing because of Woozysheepnes).
Did a few changes, for example other Crewholes. The bottom part notch is also fixed.
Was cleaning all my datas, found the IPT-Files. Enjoy!