If you are like me and already own a set of filters for the DJI Mavic PRO but you own a Mavic AIR and you dont want to buy a whole new set of filters, this is the part for you. As of this post there is nothing out there to address this situation. It took alot of trial and error to get the fitment tolerances the way I want them.
This is a pressure fit style, the fitment around the original ring on the air is very tight. The fitment for the filter is quite snug, so there is no fear of the filter falling off. The original gimbal cover will also fit over this adapter so you can leave it on. The cover will not fit with a filter attached, so remember to remove it before packing up your drone.
I removed the ring from the camera to pressure fit it into the adapter, I suggest you do do the same.
With my filters my gimbal is still free to move around the entire axis without any issues, you will have to test your filters to see how it fits.
CAUTION! Support the gimbal well when mounting the filter.
I take no responsibility for any damage to your drone and or gimbal.
Use at your own risk!
15% but you could use none. Depends on how thick you set your perimiters.
Should be a straight forward print using PLA.