Loading
Ingenioso3D

Ender 3 Bed leveling G-CODE + test print + LCD STEPS UPDATE 11/01/19

by Ingenioso3D Jun 21, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

this helped so much for my ender 3 pro bed level.

It's great to hear that :)

Thanks for help. However how do we level it when it stops? i mean how do we understand it is leveled correctly?

It's a good question, the goal is to keep the same height from the noozle to the plate all around the surface (usually we try to pass a sheet between noozle and the plate).
The midgle point in the gcode allow you to estimate if you are doing a well calibrate.The perfect calibration don't exist because the plate is not totally flat, it has got defects.
Finally you are going to see if the calibration is correct by printing some stuff . Also you can configure the first layer of the objet by your printing slicer to make sure that it stick to the plate.

Big THX for helping leveling! :)

Thanks you too by download it !! ;)

Thank you for posting this, I was about to create a version of this myself. Only question I have after reviewing the G-code was I did not see a bed temperature set. I have been just setting my bed to the temp I want then adjust.

You can custom the G-code with txt editor in order to set the bed temp by adding the cnc code M140 xxºC at the beginning.
For more cnc codes, just have a look in RepRap: https://reprap.org/wiki/G-code/es#M140:_Bed_Temperature_.28Fast.29
Thank you too !!

This is awesome Thank YOU!

You're welcome!
Hope it was helpful for you ;)