I really wanted a way to mount my Raspberry PI and 7 inch touchscreen to my new Taz 6, but just couldn't find a good set of mounting brackets I liked. So (as usual) I designed something myself.
The bracket is height-adjustable, with the left-hand rail mounted using two existing case screws on the side of the Taz-6. The right-hand side of the backing plate is is mounted to the T-slot in the extruded aluminum rail using a pair of T-Slot nuts.
(8) 3x10mm screws (I used hex head)
(2) 3mm nuts (backing plate to mounting rail)
(2) 3/16 x 1 inch pan-head screws with wing nuts and washers
(2) M3 T-Slot Nuts, Post Install
This mount will work on it's own, or with a case - I used the following designed by luc_e
Any feedback is greatly appreciated, and happy printing!
The parts are fairly simple to print, with no support needed (one of my requirements for the design) - they should be oriented correctly in the STL files, but if not, just lay them flat.