Spitrit Halloween Proton Pack 1/4" hose adapter

by Fer451 Jun 24, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Thank you for this. I have a question there is the base piece that screws in on the bottom of the pack but the upper piece if you designed one I don't see. Is there an upper piece you have made like I see in the picture if so I would be most grateful to be able to print this.

Thanks again for all these spirithalloween pack updates.

If you print the file in this thing, it’s a direct swap for the part you remove with the 2 screws. It’s just a bigger version. No second file is needed.

sorry not making myself clear the part you built fits wonderfully on the bottom of the cyclotron and allows the addition of a second blue wire.The red wire that comes with the pack leads from that bottom in and fits into canisters on the side and has a black boot on the end. In the picture you have the blue wire you have also has a boot on it. Where do you get a boot for the blue wire where it terminates from the part you offer over to the canisters on the side? I hope that makes it clearer if not I apologize :)

Ok, I understand. I cut off the red hose boot, and used 1/4” split loom and glued it to the blue and red hoses. It seems to look ok.

It does indeed, thanks