Thingiverse will be undergoing scheduled maintenance and will be unavailable from December 14 @11pm EST to December 15 @1am EST

Loading
Metalurgia

Nintendo OpenRC Mariokart

by Metalurgia Jun 25, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

I got some problems how to mount Body_rear.stl onto Chassis_Rear_V6.stl, the rear holes on Body_rear does not line up with Chassis_Rear mounts. Tried chassis_rear.stl, Chassis_Rear_V6.stl and rear_chassis_final.stl. Any hints what I am doing wrong?

Bonjour

je tien à remercié le constructeur de ce projet.

Voici une version de la Mario mi a une échelle de 60%.
j'ai modifier quelques pièces qui devenais trop fragile. Comme pour l'axes des roues en avant sont avec une tige aluminium de 4mm et sur roulements.
Pour la motorisation j'ai choisi un moteur de MiniZ bruschless 3500kv en 2S et ESC Atomic et servo 1.5kilo Bleubird.
Je vais voir pour imprimer toute une carrosserie complet et peindre.

Bonne course

For those who doesn't speak french myself included. (Google Translate)

Hello

I wish to thank the builder of this project.

Here is a version of the Mario mi on a scale of 60%.
I modified a few pieces that became too fragile. As for the axes of the wheels forward are with a 4mm aluminum rod and on bearings.
For the engine I chose a Brushless MiniZ engine 3500kv in 2S and ESC Atomic and servo 1.5kilo Bluebird.
I will see to print a whole body and paint.

Good race

Hello
A big thank you for this model.
Question:
The body is painted?
Thank you

Yes the body is 100% primed and painted.

Will you be releasing the CAD file since listing this as an OpenRC project?

None of the updated spur gears fit my motor. The 11 tooth spur gear fits, but it is very weak.

What motor and material are you using?

I am using a brushless motor ( https://smile.amazon.com/gp/product/B01CCRZHNI/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1 ) and printing the spur gear in ProtoPasta Carbon PLA.

The manual says the motor shaft is 2mm.

PLA is no good for gears, even though it has carbon fibers on it is not good. Use ABS or for best results nylon. Also that motor is no good. I tried that motor and it doesn't move the car. Use this one 2845 Motor 3100/3930KV Sensorless Brushless Waterproof 35A ESC RC Car Parts
https://banggood.app.link/vA8EWjr2wO. Now I found out that this motor is good but the esc is garbage, so you should buy a 2845 motor with a good esc.

I have everything moving with that motor. Thank you for making a new spur gear!

Check it out, I made a 12 teeth gear, 2 different shaft diameters. 2.10 and 2.15 try both. Let me know how it goes and post pictures :P

YOU DA MAN! I'll let you know how it works.

Happy to help, I only ask to upload pictures.

Thank you I had a lot of fun.