V4 update, very durable and sturdy frame ! Fully working, tired out with 10A stack, 1105 7500KV motors, GF 2540 props and 2S battery (build weight - 80g), now almost any vibrations even on more throttle !
Printed out of PETG - 30% infill - Printing time is under about 100 minutes
Use M2*5 or longer screws to mount top plate
Camera mounting : developing...
If you want use higher stack, just make columns bit higher in your slicer
Total height of frame : 20mm
Motor to motor : 120mm
Top plate height : 2.5mm
Bottom plate height : 3.5mm
Designed for 110X (1104) series motors (and some 130X - 1304) and 20x20mm stack, if you want to use 16x16mm stack, please print 16x16mm to 20x20mm fc adapter :)
More from 3D Printing
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving Gophy a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.