Steampunk Light Switch Cover Single No. 1
by intrepid, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Switch plate for single Shoulder rocker switch.
Black PLA - .20mm - 10% Fill
Here's a printed and painted one.
You can see in some spots where it is obvious I used a lower fill percentage and lower resolution.
I will be re printing at no less than 20% and .15mm on the next run
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Steampunk Light Switch Cover Single No. 1 by intrepid is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving intrepid a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure intrepid would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).